Knowledge Centre by Drone Federation India

Making the Swadeshi Switch

Summary

Making the Swadeshi Switch is the Drone Federation of India (DFI) whitepaper on self-reliance in drone manufacturing. It shows how India can make drone components at home instead of importing them, and sets out 22 policy recommendations to build a drone component supply chain in India and improve supply chain security, each assigned to the ministry, regulator or agency that can act on it. India now has more than 160 type-certified drone models, yet at the component level, flight controllers, motors, battery cells, rare earth magnets and chips are still largely imported, with China the biggest source. That import dependence is what the paper sets out to fix. The recommendations on drones policy and drone regulation cover Indian content rules for defence and civil drones, funding and collateral-free credit for makers of indigenous components, import duty with sunset dates, component testing and certification in India, SCOMET reform and drone-specific changes to existing government schemes. The goal is Atmanirbharta in the drones India builds and flies. DFI released the paper at the Bharat Drone Stack Conference 2026 in Bengaluru. Authors: Akarsh Srivastava, Shivangi Prakash and Smit Shah

Details

India’s drone industry is projected to grow from Rs 5,720 crore in FY2025-26 to about Rs 97,300 crore (USD 11 billion) by FY2030-31, according to DFI estimates. The Drone Rules 2021, the production-linked incentive of September 2021 and the February 2022 ban on complete drone imports built the assembly base for drone manufacturing in India, and more than 160 drone models now hold type certificates. The components inside those drones are a different matter.

Why self-reliance in drone manufacturing matters now

India’s drone industry is projected to grow from Rs 5,720 crore in FY2025-26 to about Rs 97,300 crore (USD 11 billion) by FY2030-31, according to DFI estimates. The Drone Rules 2021, the production-linked incentive of September 2021 and the February 2022 ban on complete drone imports built the assembly base. Bought-in components make up the larger share of a typical Indian drone’s ex-factory cost, and most critical ones are still imported. Self-reliance at the component level is now the real test of India’s drones policy. As the foreword of the paper puts it, “A drone is only as sovereign as its least sovereign part.”

Where drone supply chain security breaks

Import dependence shows in the numbers. A Lok Sabha reply of April 2025 put China-based suppliers at 39% of flight controllers in small drones. DFI estimates that 80 to 90% of flight controllers and 70 to 80% of brushless motors are imported from all sources. China makes about 94% of the world’s permanent magnets, and none of the 208 Indian suppliers on the Bharat Drone Stack platform lists rare earth magnets. Only four list battery cells.

The rules let foreign parts in. The 2022 ban covers whole drones and kits, but components remain free to import, and near-complete drones reach the market declared as parts. Supply can also be cut. China restricted drone parts in September 2024, rare earth magnets in April 2025, and announced controls on autopilots, radios, motors and speed controllers in October 2026. In February 2025, the Army cancelled orders for 400 logistics drones after Chinese-made components were found inside them. A supply chain that leans on one country for magnets, cells and electronics gives that country a say over Indian drone production.

What the paper recommends for indigenisation and component manufacturing

DFI makes 22 policy recommendations, each with a named owner. Indian makers also compete against dumped imports without the capital, test labs or steady orders they need to reach scale, so the recommendations target component manufacturing directly.

Indian components in every drone - Defence drones should carry only indigenous components in flight-critical roles, with origin checked through bills of materials, teardown audits and firmware checks. MoCA should extend the QCI indigenisation score, used today only for agricultural spraying drones, to all civil drones and make a 50% minimum score a condition of type certification. The law should define when a set of imported parts counts as a kit, and Customs should enforce it.

Support, trade and certification - Drone component makers need dedicated research funding, collateral-free credit against confirmed orders and production support sized to each component. Import duty should rise on parts that have Indian equivalents, with sunset dates announced at least two years ahead, while cells, magnets and chips stay outside those increases until India makes them at scale. Components should be certified separately and tested in Indian accredited labs. DGFT should remove standalone drone components from SCOMET and extend export incentives to them.

Schemes and missions - The Electronics Component Manufacturing Scheme, the India Semiconductor Mission, the ACC battery PLI and the rare earth magnet scheme should name drone sub-components. The National Critical Mineral Mission and the specialty steel PLI should cover drone materials, and the RDI Fund and the Technology Development Fund should prioritise drone components.

None of these measures needs a new institution. The paper’s test of Atmanirbharta in drones is plain: by 2030, a drone sold as Indian should be Indian inside. The paper also sets out what the armed forces, drone makers, banks and researchers should do, and benchmarks India’s drone regulation and manufacturing base against the United States, China, Taiwan, South Korea, Japan, Israel and Turkey. Read the full whitepaper for the market analysis, global benchmarks, component-level capability assessment and all 22 recommendations.

Page: https://www.dronefederation.in/knowledge-centre/making-the-swadeshi-switch